Name: Stainless Steel Glass Spigots / Glass Clamps
Type: Square Body Round Base
Material: Stainless Steel 2205 / Marine Grade
Size: 160 x 48 x 48
Weight: 1.3 kg.
For Glass: 10 mm / 12 mm
Surface Finish: Polished Mirror
CRAZY PRICE – LOWEST PRICE EVER – NOW 36% OFF – ONLY $29.00! 1 x Square Premium (Professional Quality) 2205 Stainless Steel Designer Glass Spigot / Glass Clamps. Has round Base plate with 8 holes for bolting to concrete or timber.
Raised cover, 22mm high to cover all type of fixings.
Dimensions: Glass Spigots / glass clamps is 48x48x160mm square body, round base with beveled edges.
Please be noted: the Raised Cover is sold seperatedly.
Features of PFC premium stainless steel Glass Spigots / Glass Clamps:
Corrosion resistance – 2205 duplex stainless steel marine grade steel – 2205 Stainless Steel is far superior in strength to standard 316 and 316L stainless steel. It is almost twice the corrosion resistance to ordinary 316. 2205 stainless steel is commonly used in harsh marine environments.
Stylish design – PFC square shaped stainless steel glass spigots / glass clamps (with bevelled corners) has the better balance of aesthetic and stability. Their square shape also means that they are by design significantly stronger than a round spigot.
Highly polished – The high polished surface means that corrosive elements cannot easily get a foot hold on the surface of the spigot.
Great tea staining resistance – tea staining is a cosmetic discolouration of the surface of stainless steel that can occur in highly corrosive environments. 2205 stainless steel that is highly polished is very resistant to tea staining.
Easy adjustment – The glass spigots / glass clamps are a ‘friction fit’ which allows for easy adjustment. The round base has 8 cashew shape holes, it is much easier for adjusting the position, and is great for DIY installation.
PFC pool fencing glass spigots / glass clamps are very EASY for DIY installation:
There are no bolt holes in the glass panel,2 scrub screws located on top and bottom, so this allows for easy adjustment for the plumb of the glass.
The glass spigots / glass clamps are a ‘friction fit’, you can use the Allen Key to adjust the scrub screw for the pressure on the glass to hold.
If you need to move a panel slightly, or completely remove a panel for any reason, you can simply loosen the scrub screws.
The ability to slightly move a panel is so important, especially when it comes to fine tuning the opening for your glass gate and also for fine tuning the gaps between your glass panels.
We recommend that the gap between each glass panel be between 20 to 60mm. At the start and finish of each length also leave a gap of 20 to 60mm. Gap under the glass is normally around 50mm.
Stainless steel maintenance:
Clean stainless steel regularly using a mild detergent and a soft brush to remove the build up of dirt, grime and salt deposits etc.
Then wash with a mild detergent and then rinse off with fresh water. Do not use heavy duty cleaners or strong household cleaner or solvents.
Never use hydrochloric acid to clean stainless steel or cleaners that are acidic or alcohol based.
Please note: if you are in a highly corrosive environment and choose not to regularly clean your stainless steel components, as a result, you may get tea staining/discolouration on your stainless steel products.